Air shower room instruction | Air shower room operation principle | Air shower room structure diagram

FLB series air shower room products are a kind of versatile local purification equipment, installed between clean rooms and non-clean rooms. When people and goods want to enter the clean area, they need to be blown through the air shower room. The clean air blown out can remove the dust carried by people and goods, and can effectively block or reduce the dust source from entering the clean area.

product features

1. Smaller size provides greater flexibility for limited channel selection.

2. The wind shower time can be adjusted from 0 to 60 seconds.

3. In order to effectively prevent the airflow inside and outside the clean area from flowing, as long as the outer door is opened, the work area starts to supply air.

Technical Parameters

FLB-1A, FLB-1B technical parameter table

model

parameter

FLB-1A

FLB-1B

Filtration efficiency

≥99.7%@≥0.5μM (sodium flame method)

Wind shower time

0 ~ 60s (adjustable)

Number of nozzles

12

6

Nozzle diameter

Φ30㎜

Ejecting wind speed

15 ~ 20m / s

power supply

AC, single phase 220V / 50Hz

Maximum power

1100W

550W

weight

250kg

200kg

Applicable number

Single / Double Blow

Single / Single Blow

Wind shower area size

W1 × D1 × H1

700 × 750 × 2000

700 × 750 × 2000

Dimensions

W × D × H

1300 × 760 × 2050

1050 × 760 × 2050

FLB-1C, FLB-1200 technical parameter table

model

parameter

FLB-1C

FLB-1200

Filtration efficiency

≥99.7%@≥0.5μM (sodium flame method)

Wind shower time

0 ~ 60s (adjustable)

Number of nozzles

9

18

Nozzle diameter

Φ30㎜

Ejecting wind speed

15 ~ 20m / s

power supply

AC, single phase 220V / 50Hz

Maximum power

2200W

550W

weight

500kg

200kg

Applicable number

Double / single blow

Double / Double Blow

Wind shower area size

W1 × D1 × H1

700 × 1150 × 2000

1200 × 700 × 2050

Dimensions

W × D × H

1050 × 1200 × 2050

1300 × 1200 × 1900

FLB-2400, FLB-3600 technical parameter table

model

parameter

FLB-2400

FLB-3600

Filtration efficiency

≥99.7%@≥0.5μM (sodium flame method)

Wind shower time

0 ~ 60s (adjustable)

Number of nozzles

36

48

Nozzle diameter

Φ30㎜

Ejecting wind speed

15 ~ 20m / s

power supply

AC, single phase 220V / 50Hz

Maximum power

400W

400W

Applicable number

Four person / double blow

Deepen double blow

Wind shower area size

W1 × D1 × H1

700 × 2400 × 1900

700 × 3600 × 1900

Dimensions

W × D × H

1300 × 2400 × 2050

1300 × 3600 × 2050

FLB-1D corner air shower room technical parameter table

model

parameter

FLB-1D

Filtration efficiency

≥99.7%@≥0.5μM (sodium flame method)

Wind shower time

0 ~ 60s (adjustable)

Number of nozzles

6

Nozzle diameter

Φ30㎜

Ejecting wind speed

15 ~ 20m / s

power supply

AC, single phase 220V / 50Hz

Maximum power

400W

Applicable number

Single / Single Blow

Wind shower area size

W1 × D1 × H1

700 × 2400 × 1900

Dimensions

W × D × H

1300 × 2400 × 2050

Schematic diagram of single-blowing air shower

Schematic diagram of double-blowing air shower room

Schematic diagram of corner air shower

Structure

The air shower room is composed of a top cover, a box, a chassis, front and rear doors, a secondary filter, a fan, and electrical control functions. It has a compact structure, ruggedness, and beautiful appearance.

working principle

After the power is turned on (press a button to turn on the power, and then press again to turn off the power), the air shower room enters the working state, the staff can open the front door to start the low noise fan to perform the air shower state, and the air in the air shower room is pressed by the pre-filter After entering the static pressure box, it is pressed out through the filter, and the purified air is ejected from the nozzle on the side of the box at a high speed through the secondary filter device. The clean air blown out can remove the dust carried by people and goods. The purpose of air shower dust removal, after a few seconds of air shower time (the blowing time can be set), the air supply will be automatically stopped, and the staff can open the back to enter the purification studio.

Installation adjustment

1. Put the chassis in the correct position when installing, and install the two sides of the box on the chassis after setting. After installing the top cover and various fixing parts, connect all the electrical cables, fix the front and rear door frames, door leaves and decorative inlays. Strips and joints are filled with sealant, and the surface dirt should be wiped off.

2. The power supply of this equipment should be connected to the power supply of the purification studio, so that it can share the power supply with the purification room at the same time, enabling synchronous use.

Care and maintenance

After using for a period of time, it is found that the dust capacity of the air pre-filter becomes dark when the surface becomes dark, and when the wind speed of the nozzle slows down, you can remove the pre-filter and rinse it with clean water. Generally, the pre-filter can be used repeatedly after 3-5 times, and the new filter material should be replaced. After 18 months of use, the secondary filter device should be replaced at the same time to ensure the purification efficiency and the wind speed of the spray.

The Microwave Popcorn Bag produced by Jinan Huafeng Printing Co., Ltd. has the features of safety, hygiene, oil and bacteria resistance, and can improve the expansion rate of the corn.

All materials have undergone rigorous quality testing.

During the production process, we pay attention to sanitation and disinfection.

We exported the bags to the United States, Europe, Southeast Asia and more than 20 countries and regions.

Microwave Popcorn Bag

Microwave Popcorn Bag,Popcorn Packaging Bag,Custom Microwave Popcorn Bag,Popcorn Bag

JINAN HUAFENG PRINTING CO., LTD , https://www.huafengpaperbag.com

Posted on